BluGuitar AMP1 – system complete

With the newly released NANOCAB and FATCAB speaker cabinets, BluGuitar now offers a complete analogue system for the BluGuitar AMP1 that delivers the optimum guitar sound.

The BluGuitar AMP1 is a professional guitar amplifier for stage and studio use. The 100 W NANOTUBE amplifier delivers enormous sound pressure and, like a good boutique tube amp, caters to every personal taste.

Four individually adjustable channels take you on an impressive journey through the history of modern guitar amplification, from clean via vintage to classic and modern sounds. AMP1 also offers switchable and adjustable boost and reverb, easy to operate with the three built-in footswitches, as well as an excellent speaker simulation for the headphone and recording outputs, giving you everything you would expect from a modern boutique tube amp. By the way, the legendary Uli Jon Roth and the extraordinary Jennifer Batten are just two examples from the growing crowd of happy AMP1 players.

The BluGuitar REMOTE1 foot controller gives you direct access to all of the AMP1’s functions. Every setting can be stored in one of 36 presets, organised in 4 banks of 9 presets each. With the built-in MIDI output, the guitarist can switch MIDI-controlled external effects units at the same time.

The optional LOOPERKIT adds 4 independent effects loops to the BluGuitar AMP1, each with its own bypass relay, for integrating analogue stompboxes. Each REMOTE1 preset can address the loops individually, linking that loop configuration to the corresponding setting on the AMP1. That makes the “tap dance” on the floorboard a thing of the past.

New: BluGuitar FATCAB 1 x 12″ guitar cab

The BluGuitar FATCAB achieves what was practically impossible until now: it packs the tone and feel of a classic 4 x 12″ cab – tight bass, lightning-fast attack in the mids and smooth, silky highs – into a 1 x 12″. Perfect for small and large stages, the FATCAB’s specially developed speaker delivers dynamic, defined bass even at low volumes, as well as dense, smooth low mids at high levels. Together with the extra-thick woven grille cloth, the custom-developed speaker itself provides a balanced guitar tone with shimmering highs.

Also new: BluGuitar NANOCAB 1 x 12″ guitar cab

The BluGuitar NANOCAB is the 1 x 12″ cab with the smallest possible dimensions, yet it produces a huge sound that sets a new standard for compact cabs. Inspired by the great performance of the FATCAB, Thomas designed a new cab that is even more compact and focused while still sounding full, a perfect match for the AMP1. The size of the cabinet, its depth and width as well as the size of the bass reflex port were meticulously tuned for maximum performance. The perfectly punchy rock sound only works with a closed-back cab, but the NANOCAB also lets you open the back of the cabinet by hand to create a classic blues tone. The speaker is rear-mounted on the baffle to create the warmest possible tone, and is protected by an extra-thick woven grille cloth.

The NANOCAB produces a great tone with unexpectedly deep bass, but it is also the perfect cab for the living room, because its tonal quality unfolds even at low volumes. What’s more, the NANOCAB even fits in a suitcase and can be carried on the train or even on a motorbike.

Consistent signal chain: BluGuitar VINTAGE PREMIUM speaker cable

Thomas Blug’s never-ending quest for the perfect tone finally led him to develop the perfect speaker cable, one that connects the outstanding sonic qualities of AMP1 and NANOCAB or FATCAB perfectly.